Section


Brand


Tonne


Availability


10 Tonne Hydraulic Puller Kit

Pullers > Hydraulic Pullers > Hydraulic Pullers
ATB1067
Brand:NORSE

Contents:
1 x 10 Tonne Hydraulic Ram
3 x 4 Legs 6 Legs & 8 Legs
1 x 20 - 105mm Separator
1 x Twin Head
1 x Triple Head
1 x Nut1 x Beam
2 x Main Rod
2 x Extension Rod
1 x Centre Adaptor
2 x Centre Extenders
Includes tough carry case


2 INCH MICROPULLER

Pullers > Mechanical Pullers > Mechanical Pullers
ATB1020
Brand:NORSE

2 INCH MICROPULLER


12 PCE. PULLER SET DN-D1002

Pullers > Mechanical Pullers > Mechanical Pullers
DN-D1002
Brand:NORSE

12 PCE. BEARING PULLER SET DN-D1002.

Bearing Sepatators:
30-50mm
50-75mm

Includes heavy duty carry case


14 PCE. PULLER SET DN-D1022

Pullers > Mechanical Pullers > Mechanical Pullers
DN-D1022
Brand:NORSE

For the professional mechanic, a combined bearing
separator and puller set made from blackened drop
forged steel and supplied with both centering and flat
adaptors for added versatility.
•Puller reach 98 mm
•Puller span up to 150 mm outside diameter
•Driven by 17mm socket or spanner (not supplied)
•4 stepped pulling arms 3/8 UNF, 3/8 UNC, 5/16
UNC and M8 threads.
•All contained together in a moulded case


PULL& PRESS KIT DN-D1025

Pullers > Mechanical Pullers > Mechanical Pullers
DN-D1025
Brand:NORSE

PULL& PRESS SLEEVE KIT DN-D1025

22 x press-on sleeves:

Inside: Diameter 34,36,38,40,42,44,46,48,50,52,54,56,
58,60,62,64,66,68,70,72,75, 80mm

Outside: Diameter 44,46,48,50,52,54,56,58,60,62,64,66,
68,70, 72,74,76,78,80,82,85,90mm
5 x pulling spindle + nuts

Sizes: M10, M12, M14, M16, M18


5 PCE.S/HAMMER PULLER DN-D1029

Pullers > Mechanical Pullers > Mechanical Pullers
DN-D1029
Brand:NORSE

The Blind Bearing Puller Set is used for removing various sizes
of blind bearings for a wide range of vehicles.
4 x Split Collets: 10mm - 14mm,15mm - 19mm
18mm - 25mm, 25mm - 32mm,1 x Slide Hammer
+ Carry Case


BLIND BRG. PULLER SET DN-D1050

Pullers > Mechanical Pullers > Mechanical Pullers
DN-D1050
Brand:NORSE

The Blind Bearing Puller Set is used for removing various
sizes of blind bearings for a wide range of vehicles.
10 x Split Collets: 8mm to 58mm, 1 x 2 Jaw Bearing
Puller, 1 x Slide Hammer,+ CarryCase


QUICK ADJ BAR TYPE 3ARM PULLER

Pullers > Mechanical Pullers > Mechanical Pullers
Brand:NORSE

QUICK ADJ BAR TYPE 3ARM PULLER


3 ARM GEAR PULLER

Pullers > Mechanical Pullers > Mechanical Pullers
Brand:NORSE

3 ARM GEAR PULLER


2/3 ARM GEAR PULLER

Pullers > Mechanical Pullers > Mechanical Pullers
Brand:NORSE

2/3 ARM GEAR PULLER


QUICK ADJ BAR TYPE 2ARM PULLER

Pullers > Mechanical Pullers > Mechanical Pullers
Brand:NORSE

QUICK ADJ BAR TYPE 2ARM PULLER


Number of Products Found: 24