Loctite 5922 - Improves the sealing performance of old and new pre-cut gaskets
Your benefits
â—¾Improves the sealing performance of old and new pre-cut gaskets (paper, cork, felt, etc.)
â—¾Slow curing paste
â—¾Sets to a permanently flexible, non-hardening film
â—¾Suitable for parts which require disassembly
Application
â—¾On engine and gearbox. For sealing/dressing flanges with old and new pre-cut compression gaskets. Ideal for part assembly after repairs.
Technical Data
â—¾Flange type: Rigid or flexible
◾Service temperature range: -54°C - +204°C
â—¾Oil resistance: Good
â—¾Water / glycol resistance: Good
â—¾Pack sizes: Tube (blister card) 60ml
• Quick-release chuck for positive engagement of the punch • Fast-turn coarse thread on hydraulic ram, for quick assembly • Locking bolt with swivel pin, for fast tightening • Enhanced bridge unit for greater strength • Ergonomic handle moulding, for greater comfort • Unique, original, patented design for producing high quality pipe flares - on the vehicle • Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage
• Hydraulic power unit provides portable power for precision flaring • Inter-changeable die, held in place by magnets • Creates SAE & DIN single and double flares (4.75mm, 3/16” pipe) • Create full, or part sections of pipe, which can be trimmed, flared or spliced as required • Supplied in moulded plastic box
• Set of tools required for belt and chain service
• Applications:
Volvo C30 (‘06-)
Volvo S40 (‘04-)
Volvo S80 (‘07-)
Volvo V50 (‘04-)
Volvo V70 (‘07-)
• Engine Codes:
1.6 – B4164S3 (Belt)
1.8 – B4184S8/11 (Chain)
2.0 – B4204S3/4 (Chain)
Flat Cold Chisel
Hand Tools > Punches and Chisels >
GPU-3020400
•Drop forged chrome vanadium steel, heat treated
•Hardened head to HRC54-58
•Painted finish for increased visibility
•Used for shaping, cutting & chipping
•30x20x400
BREAKAWAY APAPTOR 2500NM
Hand Tools > Torque > Torque
E100204
BREAKAWAY SAFETY ADAPTER
- Protects the torque mulitplier from over-torque
- E100204: fuse socket 2500 NM.
Snap-On Flexible Extension
Lubrication > Grease Guns > Grease Guns
GGF-54-2048
Brand::Gartec
9 Inch Flexible Hose and Snap-On Coupling. Provides the facility for connecting a flexible extension hose and a connector to a rigid tube of a grease gun.
FILLER CONN.M 22X1.5/100-202
Lubrication > Lubrication > Lubrication
GG-100-202
Brand::LUBE
FILLER CONN.M 22X1.5/100-202
(For use with GG-100-204 Cartridge Filler)
3/4SD COMPOSITE IMPACT WRENCH
Air Tools > Air Impact Wrenche > Air Impact Wrenche
48413
Brand::Draper
5204PRO
Mercedes Bracket (C & E Class W204 & 207)
Automotive > Automotive >
38480800
Brand::Sykes Pickavant
For Mercedes C Class (W204) 2008-2014 and E Class Coupe (W207 / C207) 2009 onwards
Front springs
4 Mechanics Vice
Automotive > Automotive >
53320400
Brand::Sykes Pickavant
• Unbreakable mechanics vice* *Excluding handle
• High quality, heavy duty construction provides years of trouble free use
• CNC machined components for excellent fit and durability
• Hardened and tempered finely ground jaws for superior grip
• Scratch resistant hammered blue finish
• Replacement parts available including jaws and handle
Our new range of External Thread Reform Tools use innovative non-cutting technology to return threads back to their original shape
Allows original parts to be reused rather than replaced
Works on all types of thread including metric, fine and imperial with compatible rollers
No external energy source is required; process is completed by hand
Threads aren’t weakened during the reforming process; cold hardening leaves the thread 39% harder than those which have been cut
Threads reformed with the Silbertool® withstand the same static and dynamic loads as a new undamaged thread, with a higher fatigue endurance limit
The finished surface is smoother than if cut which reduces the chance of corrosion and improves thread lifespan
Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately
Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool 4.75mm, 3/16in & 6mm brake pipes
Features: • Quick-release chuck for positive engagement of the punch • Fast-turn coarse thread on hydraulic ram, for quick assembly • Locking bolt with swivel pin, for fast tightening • Inter-changeable dies, held in place by magnets • Enhanced bridge unit for greater strength • Ergonomic handle moulding, for greater comfort • Unique, original, patented design for producing high quality pipe flares - on the vehicle • Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage
• Hydraulic power unit provides portable power for precision flaring • Creates SAE & DIN single and double flares (4.75mm, 3/16” & 6mm pipe) • Create full, or part sections of pipe, which can be trimmed, flared or spliced as required • Supplied in moulded plastic box
Features: • Quick-release chuck for positive engagement of the punch • Fast-turn coarse thread on hydraulic ram, for quick assembly • Locking bolt with swivel pin, for fast tightening • Inter-changeable dies, held in place by magnets • Enhanced bridge unit for greater strength • Ergonomic handle moulding, for greater comfort • Unique, original, patented design for producing high quality pipe flares - on the vehicle • Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage
• Creates SAE & DIN single and double flares • Supplied in moulded plastic box • Contents: - 02725000 - Flaremaster2 - 02160000 - Brake Pipe Aid Plier - 02210000 - Telescopic Pipe Tube Cutter: 3-32mm - 02730000 - Pipe Deburring Tool: 3.2-16mm
flaremaster2 brake pipe kit for 4.75 & 6.00mm pipes
Automotive > Brakes > Brakes
02729600
Brand::Sykes Pickavant
Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool
Features: • Quick-release chuck for positive engagement of the punch • Fast-turn coarse thread on hydraulic ram, for quick assembly • Locking bolt with swivel pin, for fast tightening • Inter-changeable dies, held in place by magnets • Enhanced bridge unit for greater strength • Ergonomic handle moulding, for greater comfort • Unique, original, patented design for producing high quality pipe flares - on the vehicle • Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage • Creates SAE & DIN single and double flares • Supplied in moulded plastic box
Hand Tools > Drilling and Tapping > Drilling and Tapping
Brand::RUKO
Helicoil Thread Repairing Sets M3 to M14
Carpenters hammer
Hand Tools > Hammers > Hammers
204
- Safety fit tubular handle PVC grip.
- Head balanced with nail-puller peen.
- Presentation: polished finish.
EBNA.2 - Standard bits series 2 for BNAE head screws
Hand Tools > Keys and Bits > Keys and Bits
- For manual screwing.
- Drive 5/16 " - 7.94 mm.
ED.2 - Standard bits series 2 for Pozidriv screws
Hand Tools > Keys and Bits > Keys and Bits
- For manual screwing.
- Drive 5/16 " - 7.94 mm.
EH.2 - Standard bits series 2 for countersunk hex screws
Hand Tools > Keys and Bits > Keys and Bits
- For manual screwing.
- Drive 5/16 " - 7.94 mm.
EH.2L - Standard long bits series 2 for countersunk hex screws
Hand Tools > Keys and Bits > Keys and Bits
- For manual screwing.
- Drive 5/16 " - 7.94 mm.
END.2 - Impact bits series 2 for Pozidriv screws
Hand Tools > Keys and Bits > Keys and Bits
- Use with impact screwdrivers.
- Drive 5/16 " - 7.94 mm.
- Finish: burnt.
ENH.2 - Impact bits series 2 for hex countersunk screws
Hand Tools > Keys and Bits > Keys and Bits
- Use with impact screwdrivers.
- Drive 5/16 " - 7.94 mm.
- Finish: burnt.
ENP.2 - Impact bits series 2 for Phillips screws
Hand Tools > Keys and Bits > Keys and Bits
- Use with impact screwdrivers.
- Drive 5/16 " - 7.94 mm.
- Finish: burnt.
EP.2 - Standard bits series 2 for Phillips screws
Hand Tools > Keys and Bits > Keys and Bits
- For manual screwing.
- Drive 5/16 " - 7.94 mm.
4 Pce Composite Scraper Set
Hand Tools > Scrapers > Scrapers
E201204
- Composite scraper set to remove objects without
damage to painted or aluminium surfaces
- Remove body trim, badges and decals from body work
- Remove residues from alloy wheels
- Can be re-sharpened with a file when required
COMBINATION WRENCH
Hand Tools > Spanners And Wrenches > Wrenches
ISO 691 - ISO 1711-1 - ISO 3318 - ISO 7738 - DIN 3113
-12-point OGV® ring angled at 15°.
- Open end angled at 15° from handle axis.
- OGV® profile maximizing the contact surface with the nut for a longer lifetime.
- Forged in Chrome Vanadium steel.
- High chrome finish.
20 Tonne Loadstar “Plus” Press Frame Add-On Pack
Pullers > Loadstar Pullers > Pullers and Separators
20204000
Brand::Sykes Pickavant
Loadstar Plus Heavy Duty Pullers offer a comprehensive range of pulling and extracting options.
Available in 20 Tonne, 30 Tonne and 50 Tonne.
Choices range from fully equipped “Comprehensive Kits” or entry level puller kits with the capability to add on extra packs as required.
These extra packs consist of Separator packs, Accessory Packs and in the 20 Tonne version there is also a Press Frame pack available.
The Loadstar Plus series is a versatile range with a range of options to suit all heavy duty pulling and extraction situations.
20 Tonne Loadstar “Plus” Press Frame Add-On Pack
Press frame assembly to add portable press capability.
Particularly useful for removal of HGV suspension King Pins.
Includes 5 extractor (pushing) pins for those hard to reach applications.
Auto -grip collar and adaptor for quick change of pins.
- 285.J10: Set of 5 stud pullers + 5 appropriate tapered and tap wrench 831.1 (use with the 4 small pullers only).
Tray PL.464.
- 285.JS10: Set of 5 stud pullers and 5 adapted tapered drill-bits supplied on stand.
- 285.JS5: Set of 5 stud pullers supplied on stand.
- Supplied in plastic case BP.104
- Dimensions: 204 x 122 x 52 mm.
- 285.J10: Set of 5 stud pullers + 5 appropriate tapered and tap wrench 831.1 (use with the 4 small pullers only).
Tray PL.464.
- 285.JS10: Set of 5 stud pullers and 5 adapted tapered drill-bits supplied on stand.
- 285.JS5: Set of 5 stud pullers supplied on stand.
- Supplied in plastic case BP.104
- Dimensions: 204 x 122 x 52 mm.
- 285.J10: Set of 5 stud pullers + 5 appropriate tapered and tap wrench 831.1 (use with the 4 small pullers only).
Tray PL.464.
- 285.JS10: Set of 5 stud pullers and 5 adapted tapered drill-bits supplied on stand.
- 285.JS5: Set of 5 stud pullers supplied on stand.
- Supplied in plastic case BP.104
- Dimensions: 204 x 122 x 52 mm.
Double Lip Oil Seal
Transmission > Oil Seals > Oil Seals
Brand::Nak
Double Lip Oil Seal - VITON
Transmission > Oil Seals > Oil Seals
Brand::Nak
TAPER LOCK BUSH 3020
Transmission > Taper Lock Bush > Taper Lock Bush
Brand::IPL
TAPER LOCK BUSH 3020
Transmission > Taper Lock Bush > Taper Lock Bush
Brand::IPL
GATES DELTA CLASSIC BELT C
Transmission > V-Belts > V-Belts
Brand::GATES
ROFLEX V-BELT B
Transmission > V-Belts > V-Belts
Brand::ROFLEX
WEBSLINGS CHAIN TENSIONER
Workshop > Ratchet Straps >
8190B8X3,5
Chain slings
TECHNICAL DATA
• Safety factor: 2
• Heat treatment: hardening tempering
• Chain-sling identification tag
ATTACHED CERTIFICATES
• Manufacturer’s Certificate
AVAILABLE CERTIFICATES
• Technical product specifications
• Test report UNI EN 10204 type 2.2
8190B Ø 8mm
6kg
TOOLS IN SOFT THERMOFORMED
Workshop > Tool Storage > Tool Storage
Soft thermoformed tray with tool assortment
2424 T204-4 TOOLS IN THERMOFORMED
Workshop > Tool Storage > Tool Storage
T204
Hard thermoformed tray with tool assortment
1/4IN air ratchet
Workshop > Workshop Tools > Workshop Tools
90204000
Brand::Sykes Pickavant
Air Ratchets
• Ergonomic handle
• 360 degree turnable exhaust
Air Ratchet Specifications:
Drive 1/4"
Torque Nm 60
Noise (dBA) 92.1
Air Consumption (l / min) 100
Weight (kg) 0.7
1IN impact wrench
Workshop > Workshop Tools > Workshop Tools
90204500
Brand::Sykes Pickavant
A NEW range of high quality impact wrenches that set the standard for Torque!
• Smart design and ergonomically designed handle
• Single-switch can be changed for easy forward or reverse operation
• Easily adjustable torque regulator
• Can be configured for right and left handed use
• Composite body
• 90204500 features magnesium alloy housing & powerful twin-hammer mechanism with 190mm long anvil