Section


Brand


Availability


ball joint separator - HGV

Automotive > Suspension > Suspension
08070000
Brand::Sykes Pickavant

• Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied
• Can be upgraded to hydraulic power (use 08075000 Upgrade Kit)


• Specification:
- Jaw Opening: 70mm
- Jaw Throat Width: 36mm
- Jaw Throat Depth: 50mm

Spare Parts:
• 08071170 - M24 x 3.0 x 140mm Screw
• 08071470 - Pivot Pin




universal suspension arm lever

Automotive > Suspension > Suspension
08080000
Brand::Sykes Pickavant

  • For lowering of the suspension arm and the separation of suspension components
  • Reduces the effort required, due to the unique design which uses leverage and the technicians’ own bodyweight to create the force required
  • Adjustable, multi-position swing point allows for variable applications – both LH & RH
  • Spare Parts:
  • 08080170 - Location Pin
  • 08080270 - Replacement Hook



universal bearing ring puller

Automotive > Suspension > Suspension
08100000
Brand::Sykes Pickavant

WHEEL BEARING REMOVAL & INSTALLATION

• For the removal of bearings, races, sleeves etc

• Ideal tool for the removal of bearing rings from hubs, axles etc

• Removes the need for cutting tools - greatly reduces bearing ring removal time

• Unique patented design - specially designed cutting edges on puller legs

• Legs ‘cut’ and are pressed into the radius behind the bearing ring

• ‘Loose / Tight’ pulling principal means force is applied evenly at all points on the bearing ring

• Suitable for all types of bearings and rings from 40 - 60mm diameter

• Supplied in plastic toolbox for safe storage

Specification:

• Spread: 40-60mm • Reach: 85mm

Spare Parts:

• 08101500 - Set of 3 legs • 08101170 - Force Screw




universal wheel bearing kit

Automotive > Suspension > Suspension
08120000
Brand::Sykes Pickavant

WHEEL BEARING REMOVAL & INSTALLATION

• Universal set for the removal and installation of flanges and wheel bearings, without the need for removal of suspension struts or wheel hubs from the vehicle (where access permits)

• Supplied in storage case – all components available individually as spare parts

• Remove and install wheel bearing without hub removal

- Virtually eliminates damage to vehicle components

- Removes the need to remove stubborn hub pinch bolt found on modern VAGs such as Audi A4, VW Passats etc

• Tool configures square to bearing – No more having to square hub assembly on hydraulic press

• Bearings fitted on nut assemblies – Greatly reduced drag in pushing bearing in / out

• Flange extraction bolts supplied - Reduces time taken to complete overall job

 

Spare Parts:

• 08121270 - M12 x 1.5 Wheel Hub Bolt • 08121370 - M14 x 1.5 Wheel Hub Bolt

• 08120570 - Main Spindle with Thrust Bearing • 08120870 - Main Nut & Bearing




GEN2 bearing - 72mm

Automotive > Suspension > Suspension
08125500
Brand::Sykes Pickavant

WHEEL BEARING REMOVAL & INSTALLATION

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)




Heavy Duty Slide Hammer Assembly (4.1kg)

Automotive > Suspension > Suspension
08530900
Brand::Sykes Pickavant

• For when greater impact is required
• Hub pullers can be further enhanced when using this heavy duty tool, which is fully compatible and can be fitted directly into the Puller Ring Plate




Ford Transit Bearing Press Kit

Automotive > Suspension > Suspension
08756000
Brand::Sykes Pickavant

Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly

  • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press
  • Removes and installs bearings on both 5 and 6 stud hubs
  • Removes the inner and outer bearing race

Contents include:
- Hub support for new bearing installation
- 5 x supporting pillars and stand for bearing removal
- 2 x adaptors for insertion and removal
- Special separator for inner ring removal




Universal Press & Pull Sleeve Kit - Car / LCV Kit

Automotive > Suspension > Suspension
08780000
Brand::Sykes Pickavant

Universal Press & Pull Sleeve Kit - Std Car kit by Sykes-Pickavant is a universal system for the removal and installation of Suspension Bushes, Bearings, Seals etc

By selecting the appropriate diameter sleeves, the bush / bearing / seal is ‘Pressed’, or ‘Pulled’ by the action of turning the spindle nuts in opposing directions. Fully universal applications for Cars, LCV’s HGV’s etc, with a range of kit options to suit individual requirements. Press & Pull Sleeve Kits can be used in the following formats:

• As a stand alone set of tools • With a standard workshop press • With a Universal Press Frame (187000V2 or 18703500)

• With a Universal C Clamp (18780200 or 18780300)

• Can also be used with selected model specific Press Piece sets and in conjunction with optional hydraulic upgrade kits All components are available individually as spare parts

• Universal applications - Car - LCV • Contains 20x Press Sleeves in 2mm diameter steps

• Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm • 4x Step Plates / 4x Pulling Spindles with thrust bearings

• Supplied in moulded storage case Specifications

•Weight - 14.55 •Dim 1 - 550 •Dim 2 - 125 •Dim 3 - 450



XS Sleeve Kit - Master

Automotive > Suspension > Suspension
08786500
Brand::Sykes Pickavant

  • Contains 10 x Press Sleeves in 2mm diameter steps
  • Inside Diameter Range: 14 - 32mm
  • Outside Diameter Range: 24 - 42mm
  • Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts and grease
  • Supplied in moulded storage case



Upgrade Kit - From 08790000 to 08797500

Automotive > Suspension > Suspension
08795000
Brand::Sykes Pickavant

• Upgrade kit from 08790000 to complete 08797500
• For owners of kit 08790000 (SUV / LCV) who wish to upgrade to the full contents of the combined LCV / HGV Kit (08797500 - below)




Coil Spring Clamp

Automotive > Suspension > Suspension
38580400
Brand::Sykes Pickavant

•Tool to secure coil spring into lower bracket for use with the SP range of suspension workstations
•Designed to hold the coil spring still during initial compression and restrict twisting through the bracket



Ball Joint Separator - Direct Action Type - Car applications

Automotive > Suspension > Suspension
66031000
Brand::Sykes Pickavant

  • Suitable for most popular car applications



Ball Joint Separator - Car / LCV applications

Automotive > Suspension > Suspension
66055000
Brand::Sykes Pickavant

• Specification:

- Jaw Opening: 45mm

- Jaw Throat Width: 19mm

- Jaw Throat Depth: 30mm




drop arm puller - Land Rover / Transit

Automotive > Suspension > Suspension
05050000
Brand::Sykes Pickavant

Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications.

  • Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender and Ford Transit applications
  • The puller is designed to be used with the steering box already removed from the vehicle
  • Includes a force screw allowing the user to effectively shock the drop arm to become loose from the steering box
     

Jaw spread capacity - 60mm

Jaw reach capacity - 80mm

 




vw alloy 4 link suspension bolt remover set

Automotive > Suspension > Suspension
08041000
Brand::Sykes Pickavant

  • Simple tool to use with ‘vibro-impact’ air hammer (90206000) when bolt ends protrude from housing.
  • Sleeve guides the impact end to free off and push bolt through the housing.
  • Extension adaptor for removing bolts when pushed deep in the housing



4 Way Ball Joint Separator - Car / LCV applications

Automotive > Suspension > Suspension
080500V2
Brand::Sykes Pickavant

  • Unique 4-way lever design allows for a wide variety of applications
  • 4 options are available, by removing the pin and selecting any of the 4 positions
  • Tapered, slim jaw fork design with tough, black epoxy coating

    Specification:
  • - Jaw Opening: 24 / 30 / 40 / 45mm options
  • - Jaw Throat Width: 19mm
  • - Jaw Throat Depth: 30mm

    Spare Parts:
    • 080511V2 - Force Screw
    • 080514V2 - Retaining Pin



Long Reach Ball Joint Splitter

Automotive > Suspension > Suspension
08060000
Brand::Sykes Pickavant

• Long reach tool, ideal for ease of access, without being restricted by wheel arches

Specification:
- Length: 400mm
- Jaw Throat Width: 18mm
- Jaw Throat Depth: 70mm




3-Size Ball Joint Separator

Automotive > Suspension > Suspension
08065000
Brand::Sykes Pickavant

  • Drop forged rugged, flat design with 3 interchangeable forks
  • Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range
  • Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation
  • Jaw capacity range: 30 - 65mm
  • 3 x fork sizes: 24, 27 and 31mm
  • Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz



suspension wear indicator

Automotive > Suspension > Suspension
08085000
Brand::Sykes Pickavant

  • An innovative tool for detecting suspension and axle joint wear
  • For detecting faults in suspension joints / struts, wheel bearings, stabilizers, bushes & ball-joints, steering gear & links



cv joint puller

Automotive > Suspension > Suspension
08090000
Brand::Sykes Pickavant

• Specialist tool for the removal of CV Joints on front wheel drive cars
• Avoids the need to remove the entire front axle
• No need to use a hammer – reduces risk of damage to the drive axle
• Approved as a special tool by VW Group - Audi, Seat, Skoda, VW – Ref: T20181




GEN2 Bearing - All sizes Master Kit

Automotive > Suspension > Suspension
081220V2
Brand::Sykes Pickavant

The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings


GEN2 Bearing Removal Combination Tool Kit
62 / 66 / 72 / 78 / 82 / 85mm

• Combination Kit for Audi / Seat / Skoda / VW applications
• Consists of all necessary parts from the 62, 66, 72, 78, 82 & 85mm kits

  • 62mm Kit - Audi A2, VW Lupo (Front)
  • 66mm Kit - Skoda Fabia, VW Fox (Front), Polo
  • 72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)
  • 78mm Kit - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3
  • 82mm Kit - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
  • 85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear)



GEN2 bearing kit - 78mm

Automotive > Suspension > Suspension
08126500
Brand::Sykes Pickavant

WHEEL BEARING REMOVAL & INSTALLATION

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3




GEN2 bearing kit - 85mm

Automotive > Suspension > Suspension
08127500
Brand::Sykes Pickavant

WHEEL BEARING REMOVAL & INSTALLATION

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

85mm - VW Multivan, Touareg, Transporter (Front / Rear)




GEN2 Bearing Kit - 82mm

Automotive > Suspension > Suspension
08128500
Brand::Sykes Pickavant

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70




Shock Handle

Automotive > Suspension > Suspension
08251900
Brand::Sykes Pickavant

  • Use in conjunction with 12731100 Impact Force Screw - allows for greater force to be applied
  • When used together, Shock handle (08251900) and Impact Force Screw (12731100) can convert 1500 series hydraulic rams to mechanical. In addition the impact shock handle to screw has a sliding centre spindle which allows the operator
    to strike the end when fully loaded. This assists the release of stubborn joints or taper fits.



Ford Transit Hub & Front Wheel Bearing Remover - Upgrade Kit

Automotive > Suspension > Suspension
08255500
Brand::Sykes Pickavant

  • Includes larger hub plate and extra-long pillars enabling owners of the 08254500 Ford Transit Hub & Front Wheel Bearing Remover Kit to remove hubs and front wheel bearings on six stud Transits



small jaws 80-115mm

Automotive > Suspension > Suspension
08390100
Brand::Sykes Pickavant

Optional Small Jaw - 80-115mm diameter for the Heavy Duty Coil Spring Compressor below (08390000)

 

08390000 - Unique Sykes-Pickavant designed vice-mounted Coil Spring Compressor

• Features double-ended hex drive (2 x 24mm hex) for ease of use

- Can be operated from either end using ratchet or 24mm wrench

- Can be safely unwound in the event of shear pin failure

• Hex drives at both ends, incorporate shear-pins for safety

- Features external thrust bearing for ease of service

- Heat treated, Self-lubricating operating screw

• Safe Working Load = 15000N

• Supplied with two sets of universal jaws:

- Medium Jaws: 110-150mm diameter

- Large Jaws: 140-195mm diameter

• N.B. Not recommended for use with Air / Electric Impact Power Tools

• 084000 Series jaws can also be used with 08390000 Coil Spring Compressor (Requires 08393200 Screws)




plastic jaw covers small (pair)

Automotive > Suspension > Suspension
08391100
Brand::Sykes Pickavant

Small jaw covers - plastic. For use with the optional Small Jaws ( 08390100 )

 




plastic jaw covers medium (pair)

Automotive > Suspension > Suspension
08391200
Brand::Sykes Pickavant

Medium jaw covers - plastic. For use with the medium jaws supplied with 08390000 ( 08390270 )




Extra Heavy Duty Coil Spring Compressor c/w Universal Jaws

Automotive > Suspension > Suspension
08400000
Brand::Sykes Pickavant

• Safe working load 2250kg (22500N)
• Supplied with 1 x pair of universal MULTIPURPOSE jaws
- Patented innovative shape of jaw design fits most types and sizes of springs
- Protective high-tech inserts in jaw for added safety
- Jaws diameter 80-200mm covers 90% of applications
• Built-in protective accessory for vice clamping
• Large user friendly adjustable handle for fast jaw positioning
• Overload shear pin for safe operator use
• Range of specialist jaw options available
• TUV approved
• Supplied with full instructions and vehicle applications
 

Spare Parts:
• 08400100 - Universal Jaw (single) • 08402400 - Shear Pin




80-120mm small jaw

Automotive > Suspension > Suspension
08400500
Brand::Sykes Pickavant

Extra Small jaw - 80-120mm diameter for use with the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles




80-145mm conical spring jaw

Automotive > Suspension > Suspension
08400600
Brand::Sykes Pickavant

Jaw for Conical Springs 80 - 145mm for the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles




special jaw

Automotive > Suspension > Suspension
08400700
Brand::Sykes Pickavant

Jaw for BMW 3 series E46, E90, 5 series E39,E60, F10 Renault Megane 2, 3 for the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles




special jaw merc c class

Automotive > Suspension > Suspension
08400800
Brand::Sykes Pickavant

Jaw for Mercedes C Class for the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles




special jaw merc e-class

Automotive > Suspension > Suspension
08400900
Brand::Sykes Pickavant

Jaw for Mercedes E Class, for the Heavy Duty Coil Spring Compressor (08400000)

Note: Optional Specialist Jaws are supplied as singles




safety cage

Automotive > Suspension > Suspension
08401500
Brand::Sykes Pickavant

Workbench or wall-mounted for operator safety

• Minimizes risk of injury & improves safety

• Cage has hinged opening and dedicated slot in the base for securing the 08400000 HD Coil Spring Compressor (above)




universal protective clamp for strut insert pistons

Automotive > Suspension > Suspension
084876V2
Brand::Sykes Pickavant

UPDATED KIT NOW INCLUDES 70MM PINS FOR INCREASED APPLICATIONS

• Fixes the piston rod in position when replacing coil springs
• Prevents the piston rod from being drawn back into the strut




8Pc Injector Removal Forks & Adapter Set

Automotive > Suspension > Suspension
08559000
Brand::Sykes Pickavant

•Add-on kit for use with 08585000 Heavy Duty Slide Hammer Injector Removal Kit and 185800V2 Hydraulic Injector Puller Kit

Includes:
- Adaptors to attach to the external thread of the injectors
- Forks to attach to the body of the injector
- Sockets to allow the injector to be pulled from different locations
• Compatible thread sizes with 185800V2 - Hydraulic Injector Puller Kit
• Applications include: Citroen C5 / Jumpy / Xsara, Fiat Ducato JTD, Peugeot 206 / 307 / 406 / Boxer (2.0 / 2.2 / 2.3 HDI), Mercedes-Benz CDI (exc. A-Class (Sprinter / Vito), Opel Renault F9Q
• Hook sizes: 12, 13.5, 16 and 26mm
• Optional Convertor (08580470) also available to work with slide hammers with 5/8 UNF threads



bush tool bmw x5 e53 rear suspension

Automotive > Suspension > Suspension
08720400
Brand::Sykes Pickavant

• For removal and installation of rear axle carrier mounting bushes X5 ( E53 ) models

• Consumable spares kit : 08720311




Ford & Volvo Rear Bush Tool - UPDATED KIT

Automotive > Suspension > Suspension
087304V2
Brand::Sykes Pickavant

The updated Ford & Volvo Rear Bush Tool Kit is an individual press piece kit for dismantling and installing the rear wishbone / trailing arm bush and it correctly aligns & sets bush depth in trailing arm upon installation, so not to tear bush.

The kit is suitable for: Ford: Mondeo ‘07, Mondeo Estate ‘00 - ‘07, S-Max & Galaxy ‘06 Volvo XC70 & V70 ‘07 Volvo XC60 ‘08 Volvo S60 & V60

Specifications
•Weight - 5.65
•Dim 1 - 265
•Dim 2 - 160
•Dim 3 - 145


VW / Audi Rear Axle Bush Insertion Tool

Automotive > Suspension > Suspension
08760100
Brand::Sykes Pickavant

• For the installation of bonded rubber / plastic type rear axle mounting bushes, on Audi A3, VW Golf 4, VW Bora - all models 2001 - 2004

N.B. Most models were originally fitted with hydraulic type rubber bushes when new - These can be knocked out manually. This tool is required for fitting the new bonded rubber / plastic type replacement bushes. Always replace in pairs.

Spare Parts:

• 08760111 - Consumable Spares Kit

 




VW polo track control arm bush tool

Automotive > Suspension > Suspension
08760200
Brand::Sykes Pickavant

• For removal and installation of the rear bush on the front control arm, as fitted on:

- VW Polo 11 - ‘01-

- Seat Cordoba 11 - 2002-

- Skoda Fabia 12 - 1999-

Spare Parts:
• 08760211 - Consumable Spares Kit




universal press block

Automotive > Suspension > Suspension
08770000
Brand::Sykes Pickavant

WHEEL BEARING REMOVAL & INSTALLATION

• Universal Support for use with a workshop press

• Three point contact guarantees a perfect, safe support

• Easily press bearings on a wide variety of suspension arms

• Features:

- Adjustable height anvil bolts

- Swivel element for added versatility

- Safety Alignment brackets for security on press

Spare Parts:

• 08770570 - Replacement Pressure Bolt Set (13 pcs)




Universal Press & Pull Sleeve Kit - SUV / LCV

Automotive > Suspension > Suspension
08790000
Brand::Sykes Pickavant

The Sykes-Pickavant Universal Press & Pull Sleeve Kit - SUV/LCV is: • For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000) • Allows access to a wider range of vehicles, particularly SUV’s and LCV’s

• Contains 8 x Press Sleeves in 2mm diameter steps

• Inside Diameter Range: 82 - 88mm and 98 - 104mm

• Outside Diameter Range: 92 - 98mm and 108 - 114mm

• 4 x Step Plate Discs • 2 x 20mm Pulling Spindle Adaptors with Thrust Bearings M20

• Supplied in moulded storage case

Specifications
•Weight - 18.75
•Dim 1 - 610
•Dim 2 - 508
•Dim 3 - 60


Universal Press & Pull Sleeve Kit - Commercial Vehicle

Automotive > Suspension > Suspension
08797500
Brand::Sykes Pickavant

• Complete kit for SUV, LCV, PSV, HGV
• Contains 20x Press Sleeves in 2mm diameter steps
• Inside Diameter Range: 74 - 112mm in 2mm steps
• Outside Diameter Range: 84 - 122mm in 2mm steps
• 4x Step Plate Discs / 4x Pulling Spindles with nuts & thrust bearings M10 / M12 / M14 / M16
• 2 x 20mm Heavy Duty Pulling Spindles (M20 long & M20 short) with thrust bearings
• Supplied in moulded storage case




Impact Force Screw

Automotive > Suspension > Suspension
12731100
Brand::Sykes Pickavant

  • Can be used in any SP Hub Puller in place of Hydraulic Ram or Slide Hammer (11/2” BSW thread)
  • When used together, Shock handle (08251900) and Impact Force Screw (12731100) can convert 1500 series hydraulic rams to mechanical. In addition the impact shock handle to screw has a sliding centre spindle which allows the operator to strike the end when fully loaded. This assists the release of stubborn joints or taper fits.



1549-KIT FOR SHOCK ABSORBERS

Automotive > Suspension > Suspension
1549
BETA

Kit for removing and installing double effect shock absorbers with gas returnAllows stem to be kept straightened while springs are being installed User friendly Reduced time of use Risk free TECHNICAL SPECIFICATIONS Stem diameter: 12-28 mm Clamp thickness: 20 mm


1555 S/BMW-RNT-FORKS 1555

Automotive > Suspension > Suspension
1555_SBM_W-RNT
BETA

Fork for BMW E39 E46 and Renault M-gane II shock absorbers for items 1555DS and 1555/QS


1556 /1A-COMPRESSOR FOR ABSORBER SPRINGS

Automotive > Suspension > Suspension
1556_1A
BETA

Compressor for shock absorber springs


** SPECIAL OFFER PRICE **

1556 /2A-COMPRESSOR FOR ABSORBER SPRINGS

Automotive > Suspension > Suspension
1556_2A
BETA

Compressor for shock absorber springs


** SPECIAL OFFER PRICE **

1557 /S3-SOCKETS FOR SHOCK ABSORBER NUTS

Automotive > Suspension > Suspension
1557/S3
BETA

Set of 3 sockets for shock absorber nuts


1557 V-IMPACT SOCKETS VOLVO LEAF SPRINGS

Automotive > Suspension > Suspension
1557/V
BETA

Impact sockets for Volvo leaf springs


1566 N45X190-TOOL REMOVING STEERING ARMS

Automotive > Suspension > Suspension
1566N/45X190
BETA

Tool for removing/installing steering arms


1566 N45X400-TOOL REMOVING STEERING ARMS

Automotive > Suspension > Suspension
1566N/45X400
BETA

Tool for removing/installing steering armsCapacity: - 35-45 mm L= 400 mm 1/2" square drive or 27 mm hexagon drive


1566 N35X400-TOOL REMOVING STEERING ARMS

Automotive > Suspension > Suspension
1566N_35X400
BETA

Tool for removing/installing steering arms


12 Tonne hydraulic ball joint separator

Automotive > Suspension > Suspension
180700V2
Brand::Sykes Pickavant

Updated kit now uses power from the SP 12 tonne hydraulic ram
• Hydraulic version of the 08070000 HGV Ball Joint Separator
• Specification:
- Jaw Opening: 70mm
- Jaw Throat Width: 36mm
- Jaw Throat Depth: 50mm




universal press frame c/w 12 tonne hydraulic ram

Automotive > Suspension > Suspension
187000V2
Brand::Sykes Pickavant

• Updated unit now provides greater power
• Allows easier operation - 50% more capable using the SP 12 tonne Hydraulic Ram
• Includes adaptor ring for use with 08780000 Universal Press & Pull Sleeve Kit
• Can be used in the following formats:
- On its own as a stand alone tool
- With Universal Press & Pull sleeve kits
• Open frame design - 200mm of clearance through the press frame
• Ideal for use with individual model specific press piece sets




Universal Press Frame

Automotive > Suspension > Suspension
18700100
Brand::Sykes Pickavant

  • Includes adaptor ring (18780400) for use with 08780000 and related press piece sets
  • Can also be used with 8 or 12 Tonne SP hydraulic ram and press frame pressure screw



Fiesta & Focus Master Bush Kit including Press Frame & Pressure Screw

Automotive > Suspension > Suspension
18732000
Brand::Sykes Pickavant

Kit includes adaptor set for the removal and installation of trailing arm bushes,18700100 Press Frame and 18704100 Pressure Screw

Bush OEM reference numbers:
Fiesta - 1011363, 1016439, 96FB5K653CA
Focus - 1 061 670, 1304124

Focus Applications:
- C-MAX ‘07- MPV
- MKI ‘98-’04 Estate, Hatchback, Saloon, Van
- MKII ‘04- Convertible, Hatchback, Saloon, Van
- Kuga ‘08- Off Road
- Mazda 3 (BK) ‘03-’09 Saloon, Hatchback
- Mazda 5 (CR/CW) ‘05- MPV
- Volvo C30 ‘06- Hatchback
- Volvo C70 II ‘07- Cabrio
- Volvo S40 II ‘04-’12 Saloon
- Volvo V50 ‘04-’12 Estate

Fiesta Applications:
- Fiesta ‘95-’02
- KA ‘96-’08
- Puma ‘96-’02




Adaptor Set for Fiesta Trailing Arm Bushes

Automotive > Suspension > Suspension
18732100
Brand::Sykes Pickavant

Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram

Kit includes adaptor set for Fiesta Bushes, for the removal and installation of trailing arm bushes
Fiesta Bush OEM reference numbers: 1011363, 1016439, 96FB5K653CA

Fiesta Applications:
- Fiesta ‘95-’02
- KA ‘96-’08
- Puma ‘96-’02

*Note - Adaptor Ring 18780400 required




Adaptor Set for Focus Trailing Arm Bushes

Automotive > Suspension > Suspension
18732200
Brand::Sykes Pickavant

Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram

Kit includes adaptor set for Focus Bushes, for the removal and installation of trailing arm bushes
Focus Bush OEM reference numbers: 1 061 670, 1304124

Focus Applications:
- C-MAX ‘07- MPV
- MKI ‘98-’04 Estate, Hatchback, Saloon, Van
- MKII ‘04- Convertible, Hatchback, Saloon, Van
- Kuga ‘08- Off Road
- Mazda 3 (BK) ‘03-’09 Saloon, Hatchback
- Mazda 5 (CR/CW) ‘05- MPV
- Volvo C30 ‘06- Hatchback
- Volvo C70 II ‘07- Cabrio
- Volvo S40 II ‘04-’12 Saloon
- Volvo V50 ‘04-’12 Estate

*Note - Adaptor Ring 18780400 required




Mercedes Ball Joint Adaptor Set

Automotive > Suspension > Suspension
18747200
Brand::Sykes Pickavant

Certain vehicle models require model specific sets of press pieces due to the specific design of the vehicle components.
The Individual Press Piece set hasbeen developed for such circumstances, and should be used in conjunction with the Universal Press Frames (187000V2 / 18703500), Universal C Clamps (18780200 / 18780300) or the Universal Press & Pull Sleeve Set (08780000)

• For use on Outer Ball Joints
- Mercedes W211 (E Class 02 - 09)
- Mercedes W220 (S Class 98 - 06)
- Mercedes W230 (SL Class 02 - 09)
 

This set can be used in conjunction with either 18780200 - Universal C Clamp or with 18780300 Ball Joint C-Clamp when working off-the-vehicle – However, for on the vehicle usage, the Ball Joint C-Clamp 18780300 has been designed for this purpose.




Land Rover Swivel Ball Joint Kit - Adaptor Set only

Automotive > Suspension > Suspension
18771000
Brand::Sykes Pickavant

  • A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 1998 – 2004 & Range Rover P38A 1994 – 2002
  • Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the car” solution (Inc in 18771100 only)
  • Designed, tested and manufactured in Great Britain

    Other kit options available - See related products 18771100 and 18771200



Land Rover Swivel Ball Joint Tool including Adaptors/ Press Frame/ Adaptor Ring & Ram

Automotive > Suspension > Suspension
18771100
Brand::Sykes Pickavant

Land Rover Swivel Ball Joint Tool including Adaptors, Press Frame, Adaptor Ring & Ram

  • A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 1998 – 2004 & Range Rover P38A 1994 – 2002
  • Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the car” solution
  • Designed, tested and manufactured in Great Britain

    Other kit options available - See related products 18771000 and 18771200



Land Rover Swivel Ball Joint Kit - Adaptor Set including Press Frame & Adaptor Ring

Automotive > Suspension > Suspension
18771200
Brand::Sykes Pickavant

Land Rover Swivel Ball Joint Kit - Adaptor Set including Press Frame & Adaptor Ring

  • A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 1998 – 2004 & Range Rover P38A 1994 – 2002
  • Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the car” solution (Inc in 18771100 only)
  • Designed, tested and manufactured in Great Britain

    Other kit options available - See related products 18771000 and 18771100

 




Land Rover Bush Press Kit

Automotive > Suspension > Suspension
18775000
Brand::Sykes Pickavant

Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

  • For radius arm, panhard bushes and general suspension bushes
  • Dedicated shaped press pieces for correct location and alignment
  • Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Kit includes 6 Adaptor Pieces for use in a workshop press with suspension parts removed from vehicle




Multi-application step plate

Automotive > Suspension > Suspension
18775100
Brand::Sykes Pickavant

  • New single piece stepped press frame plate
  • Allows for many different sized press pieces to fit positively into the frame for precise work



Land Rover Bush Kit - Press Frame Option

Automotive > Suspension > Suspension
18775500
Brand::Sykes Pickavant

Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

  • For radius arm, panhard bushes and general suspension bushes
  • Dedicated shaped press pieces for correct location and alignment
  • Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Kit includes 6 Piece Adaptor Set, 18775100 step plate, press frame, adaptor ring & 12 Tonne SP hydraulic ram

*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp
 




Land Rover Bush Kit - Press Frame Only Option

Automotive > Suspension > Suspension
18775600
Brand::Sykes Pickavant

Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

  • For radius arm, panhard bushes and general suspension bushes
  • Dedicated shaped press pieces for correct location and alignment
  • Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Kit includes 6 Piece Adaptor Set, 18775100 step plate, press frame & adaptor ring, for customers who already have an SP hydraulic ram

*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp

 




Land Rover Bush Kit - C Clamp Option

Automotive > Suspension > Suspension
18775700
Brand::Sykes Pickavant

Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

  • For radius arm, panhard bushes and general suspension bushes
  • Dedicated shaped press pieces for correct location and alignment
  • Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Kit includes 6 Piece Adaptor Set, 18775100 step plate & C Clamp for minimal vehicle strip-down

 




Land Rover Discovery 3 & 4 Suspension Bush Master Kit

Automotive > Suspension > Suspension
18777000
Brand::Sykes Pickavant

• The Sykes-Pickavant Land Rover 3 & 4 Suspension Bush Kit (18777000) is a comprehensive solution specifically designed for removal of seized/corroded bushes and installation of replacement bushes for Land Rover Discovery 3 & 4 and Range Rover Sport models.

• Available kits are as follows:

- Master Kit (18777000)

- Front lower (18777100)

- Front upper (18777200)

- Rear lower (18777300)

- Rear upper (18777400)

• Only the bushes have to be replaced, saving the cost and time in replacing the complete arm. Lower arm bushes can be replaced on vehicle without having to remove the wheel. Individual press frame pieces for each wishbone.

• To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram)



Land Rover Discovery 3 & 4 Suspension Bush Front Lower Kit

Automotive > Suspension > Suspension
18777100
Brand::Sykes Pickavant

• The Sykes-Pickavant Land Rover Discovery 3 & 4 is a comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models

• Available kits are as follows:

- Master Kit (18777000)

- Front lower (18777100)

- Front upper (18777200)

- Rear lower (18777300)

- Rear upper (18777400)

• Only the bushes have to be replaced, saving the cost and time in replacing the complete arm. Lower arm bushes can be replaced on vehicle without having to remove the wheel. Individual press frame pieces for each wishbone.

• To be used in conjunction with the Sykes-Pickavant Universal Press Frame (18700100) and due to the nature of corroded components, the power of the Sykes-Pickavant 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram).

• The Sykes-Pickavant (90206000) Vibro Impact Air Hammer can be used to assist in the removal of corroded suspension bolts and bushes.



Land Rover Discovery 3 & 4 Suspension Bush Front Upper Kit

Automotive > Suspension > Suspension
18777200
Brand::Sykes Pickavant

Land Rover Discovery 3 & 4 Suspension Bush Front Upper Kit

A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models

Available kits are as follows:
- Master Kit (18777000)
- Front lower (18777100)
- Front upper (18777200)
- Rear lower (18777300)
- Rear upper (18777400)

  • Only the bushes have to be replaced, saving the cost and time in replacing the complete arm
  • Lower arm bushes can be replaced on vehicle without having to remove the wheel
  • Individual press frame pieces for each wishbone
  • To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram)
  • The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See video below



Land Rover Discovery 3 & 4 Suspension Bush Rear Lower Kit

Automotive > Suspension > Suspension
18777300
Brand::Sykes Pickavant

Land Rover Discovery 3 & 4 Suspension Bush Rear Lower Kit

A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models

Available kits are as follows:
- Master Kit (18777000)
- Front lower (18777100)
- Front upper (18777200)
- Rear lower (18777300)
- Rear upper (18777400)

  • Only the bushes have to be replaced, saving the cost and time in replacing the complete arm
  • Lower arm bushes can be replaced on vehicle without having to remove the wheel
  • Individual press frame pieces for each wishbone
  • To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram)
  • The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See video below



Land Rover Discovery 3 & 4 Suspension Bush Rear Upper Kit

Automotive > Suspension > Suspension
18777400
Brand::Sykes Pickavant

Land Rover Discovery 3 & 4 Suspension Bush Rear Upper Kit

A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models

Available kits are as follows:
- Master Kit (18777000)
- Front lower (18777100)
- Front upper (18777200)
- Rear lower (18777300)
- Rear upper (18777400)

  • Only the bushes have to be replaced, saving the cost and time in replacing the complete arm
  • Lower arm bushes can be replaced on vehicle without having to remove the wheel
  • Individual press frame pieces for each wishbone
  • To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram)
  • The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See video below



universal C clamp - large

Automotive > Suspension > Suspension
18780200
Brand::Sykes Pickavant

• Universal clamps for the dismantling and installation of suspension parts on the vehicle

• Specially designed Universal Clamps for use with the ‘0878’ / ‘0879’ Series Press & Pull Sleeve Kits

• Designed to allow greater access in restricted situations and where the Universal Press Frame is not suitable

• Special ‘trapezoidal’ threaded screw, allows for the application of greater force and can be used with Impact Air Wrenches, as well as standard ratchets / wrenches etc. Also capable of accepting the SP1500 or SP1800 Hydraulic Rams.

UNIVERSAL C CLAMP - Internal frame dimensions: 245mm x 70mm




Adaptor Ring

Automotive > Suspension > Suspension
18780400
Brand::Sykes Pickavant

  • Ring sits in press frame to hold adaptors in place



Universal C-Clamp

Automotive > Suspension > Suspension
18780500
Brand::Sykes Pickavant

•For the dismantling / installation of suspension components on the vehicle
•Jaw opening: 245mm
•Throat depth: 100mm
•Includes adaptors for use with the 08780000 and XS Sleeve kits
•Designed to allow greater access in restricted situations and where the universal press frame is not suitable
•Special ‘trapezoidal’ threaded screw, allows for the application of greater force
•Base cup works with gold and silver rings from the SP press frame (18700100 / 187000V2)
•Includes impact screw which can be removed and replaced with a hydraulic ram (1500 & 1800 Series)
•Can be used with an impact gun



hydraulic upgrade kit for 08780000

Automotive > Suspension > Suspension
18782500
Brand::Sykes Pickavant

A universal system for the removal and installation of Suspension Bushes, Bearings, Seals etc

By selecting the appropriate diameter sleeves, the bush / bearing / seal is ‘Pressed’, or ‘Pulled’ by the action of turning the spindle nuts in opposing directions. Fully universal applications for Cars, LCV’s HGV’s etc, with a range of kit options to suit individual requirements.

Press & Pull Sleeve Kits can be used in the following formats:

• As a stand alone set of tools

• With a standard workshop press

• With a Universal Press Frame (187000V2 or 18703500)

• With a Universal C Clamp (18780200 or 18780300)

• Can also be used with selected model specific Press Piece sets and in conjunction with optional hydraulic upgrade kits

All components are available individually as spare parts

 

• When used in conjunction with components from 08780000, or 08797500, these kits allow application of up to 12 tons of hydraulic force which can be used to provide a controlled force in place of the manual or mechanical effort required when using 08780000 / 08797500

• Contents:

- Hollow Ram Hydraulic Cylinder, Alignment washer and 2x extra-long heavy-duty spindles that are rated for use with the hydraulic ram. (Note: Standard 08780000 spindles are not rated for use with the 18782500 and / or 18792500 hydraulic ram)

• Cylinder: 8mm stroke




hyd upgrade kit for 08790000

Automotive > Suspension > Suspension
18792500
Brand::Sykes Pickavant

  • When used in conjunction with components from 08780000, or 08797500, these kits allow application of up to 12 tons of hydraulic force which can be used to provide a controlled force in place of the manual or mechanical effort required when using 08780000 / 08797500
  • Contents:

- Hollow Ram Hydraulic Cylinder, Alignment washer and 2x extra-long heavy-duty spindles that are rated for use with the hydraulic ram. (Note: Standard 08780000 spindles are not rated for use with the 18782500 and / or 18792500 hydraulic ram)

  • Cylinder: 40mm stroke



** SPECIAL OFFER PRICE **

Work Station Arm Extender - Pair

Automotive > Suspension > Suspension
385800-60
Brand::Sykes Pickavant

•Mounts between original top arm and jaw attachment
•Use to extend the length of the top spring mounting jaw position
•Assists in keeping forces in line with top arm for safety
•Can be used singly to provide 10mm extension or as a pair to provide 20mm extension



Workstation Swivel Jaws - Pair

Automotive > Suspension > Suspension
385800-61
Brand::Sykes Pickavant

•Mounts onto top arms in place of standard top jaws & contacts directly onto spring
•Jaw ‘floats’ to follow changes in spring angle / profile during compression
•Constant contact with the coil spring surface area for increased safety
•Able to work on both left and right handed coil springs



Jaw Holder

Automotive > Suspension > Suspension
38580200
Brand::Sykes Pickavant

For use with 3858 and 3868 workstation brackets
• Includes 3 x hanging hooks and 4 x slots for brackets
• Provides a tidy and safe storage solution


Ball Joint Splitter

Automotive > Suspension > Suspension
66049000
Brand::Sykes Pickavant

• Specification:
- Length: 195mm
- Jaw Throat Width: 15mm
- Jaw Throat Depth: 69mm




Vibro-Impact Chisel

Automotive > Suspension > Suspension
90236100
Brand::Sykes Pickavant

•Sheet metal cutter accessory
•Grooved non-twist body shaft design securely locks into vibro-impact air hammer (90206000) for precise use



Vibro-Impact Chisel

Automotive > Suspension > Suspension
90236200
Brand::Sykes Pickavant

•Separator accessory
•Grooved non-twist body shaft design securely locks into vibro-impact air hammer (90206000) for precise use



Vibro-Impact Chisel

Automotive > Suspension > Suspension
90236300
Brand::Sykes Pickavant

•Half round attachment for 90206000 Vibro-Impact air hammer
•Grooved non-twist body shaft design securely locks into
vibro-impact air hammer for precise use



Vibro-Impact 2Pce Chisel Set

Automotive > Suspension > Suspension
90237500
Brand::Sykes Pickavant

•Set of 2 x chisels for cutting the inner and outer exhaust tube for use with 90206000 Vibro-Impact Air Hammer


Vibro-Impact Concave Hammer Insert

Automotive > Suspension > Suspension
90238500
Brand::Sykes Pickavant

•Additional part for use with 90206000 Vibro-Impact Air Hammer
•Concave design locates hammer insert for concentrated effort
•Ideal for use on bolts & pins
•Length: 150mm



SP Heat Pad

Automotive > Suspension > Suspension
96025000
Brand::Sykes Pickavant

• Removal of decals, graphics, stripes, emblems and body mouldings etc
• Softens the adhesive to make removal simple & effective




SP Rope Coil Set (3 Pce)

Automotive > Suspension > Suspension
960260SP
Brand::Sykes Pickavant

•Set of three highly adaptable coil allows user to shape to suit
•Suitable for use with SP Induction Heater
•Use three / four windings of coil for maximum performance



Mac Pherson clamp separator set

Automotive > Suspension > Suspension
DS.J5
Facom

- Including:
- DS.10A: 7.5 x 9 mm.
- DS.11A: 5.2 x 6.9 mm.
- DS.12A: 6.6 x 7.9 mm.
- DS.13: 4.3 x 6.0 mm.
- DS.14: 12.7 x 16.7 mm.
- DS.P: 3/8" (9.53 mm) square drive operating handle.
- J.236: Bit holder socket.
- Helps open the clamp on vehicles fitted with Mac Pherson struts.
- Allows shock-absorbers to be stripped down at the work bench.
- Fast and efficient.
- All vehicles fitted with removable clamps (Citroen, Peugeot, Ford, VAG, Audi).
- A "junior" series ratchet can be used instead of the handle (space provided in the case).


1557 IMPACT SOCKETS FOR LEAF SPRINGS

Automotive > Suspension > Suspension
BETA

Impact sockets for leaf springs


U.16 - Ball joint pullers

Automotive > Suspension > Suspension
U.16A18
Facom

- Used to dismount steering and suspension ball joints.
- Supplied with a set of 2 spare safety pins.
- U.16-05J3: Set of 3 pins for U.16B and U.16A18.
- U.16-A45-05J3: Set of 3 shear pins for U.16B32 and U.16B45.


Number of Products Found: 96